OP993 Overview
The photodiodes are packaged in the Bulk to prevent damage. To ensure safety, photodiodes are put into TO-18 packages. Continually operating in reverse-bias mode, a photodiode's maximum voltage is 60V. In reverse-bias mode, the voltage for the photodiodes should not exceed 60V continuously. There are 2 pins on the photodiodes. It is possible for the photodiodes within a circuit to release 100mW heat. When photodiodes are operating, the temperature should not exceed 100°C. However, the photodiodes should be operated at a minimum temperature of -40°C. For photodiodes, the reverse anode voltage should be 60V. In order for current to flow across a photodiode, the voltage must be 1.2V. In reverse-bias mode, the photodiodes could supply 60V. Photodiodes exhibit 1nA current even in the absence of light input.
OP993 Features
Moisture Sensitivity Level (MSL): 1 (Unlimited)
Operating Temperature: -40°C~100°C
Packaging: Bulk
Diode Type: PIN
Mount: PCB, Through Hole
Spectral Range: 500nm ~ 1100nm
Response Time: 5ns
Viewing Angle: 90°
OP993 Applications
There are a lot of TT Electronics/Optek Technology
OP993 Photodiodes applications.
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
- Measurement Levelling
