XC6118N20AMR-G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC power and other Voltage Detector products. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 2V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. There are 5 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 6V volts. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. There are also other features in the software such as [0], just to mention a few. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.8μA.
XC6118N20AMR-G Features
Voltage Detector type
Minimum supply voltage of 1V
XC6118N20AMR-G Applications
There are a lot of Torex Semiconductor Ltd XC6118N20AMR-G Voltage Supervisors applications.
- Computer applications
- Network equipment
- Electronics installed in the vehicle
- Leakage protection
- Refrigeration
- WiFi router
- Detection of phase sequence
- Household appliances
- Microcontroller system
- emergency room
