VFC320CP Overview
As part of the 14-DIP (0.300, 7.62mm) package, it is embedded. The electronic part is located in the direction of Through Hole. There is a package in the way of Tube. Volt to Frequency and Frequency to Volt is the type of this electrical device. As a matter of fact, there are 14 terminations, which involve terminating a transmission line with a device which matches its characteristic impedance. 14 pins are equipped with this device. The device is powered by a supply voltage of 15V. It is possible to locate related parts based on the base part number. When a computer or other communication device is attached to a signal interface, there are 14 pins, which are pronged contacts. Consequently, it operates at a minimum operating temperature of -25°C to ensure its reliability. As a result, it operates at a maximum operating temperature of 85°C to ensure its reliability. In Through Hole, it is mounted. It operates at a frequency of 1MHz. This electrical device is powered by 15V voltage. It is powered by a dual supply voltage of 15V. This electronic part supports a maximum of two negative input types -10V. 7.5mA is the maximum supply current for this device. In this electrical device, the bandwidth is 1MHz.
VFC320CP Features
14-DIP (0.300, 7.62mm) package
14 terminations
14 pin count
14 pins
A dual supply voltage of 15V
The maximal supply current of 7.5mA
VFC320CP Applications
There are a lot of Texas Instruments
VFC320CP V/F & F/V Converters applications.
- Hand-Held Tachometers
- Speed Governors
- Cruise Control
- Automotive Door L ock Control
- Clutch Control
- Horn Control
- Touch or Sound Switches
- lsolation of High Common-Mode Voltages
- Low-Cost Analog-to-Digital Conversion
- Battery Monitoring
