UCC39422NG4 Overview
With its 20-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). 1.8V~8V is the operating voltage and supply voltage of the dc control. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 150kHz~1.2MHz with this switching controller. It is suitable for general dc dc regulator when it is set to Through Hole. The dcdc regulator features Enable, Frequency Control, Low Battery, Reset for efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Various 20 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 3V. A search for "UCC39422" will reveal other relevant dc to dc converter ics. Total pins of switching converter are 20. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 8V voltage. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. 2MHz is the maximum frequency of this dc regulators. As a result, DC to DC voltage regulator has a value of CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE so that the need can be met more directly. It is suggested that users apply 8V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The output value is set to the greatest value of 0.00065A. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 8V. A voltage of 1.8V is required for the supply. At its maximum output, the switching converter can provide 8V volts. Lowest voltage output of the voltage controller must be greater than 2.5V.
UCC39422NG4 Features
Transistor Driver Outputs
Switching Frequency: 150kHz~1.2MHz
Enable, Frequency Control, Low Battery, Reset
PULSE WIDTH MODULATION
CONFIGURABLE PEAK CURRENT MODE; PROGRAMMABLE PFM TECHNIQUE
UCC39422NG4 Applications
There are a lot of Texas Instruments UCC39422NG4 DC to DC converter applications.
- Hydraulic presses
- Network technology
- Textile machinery
- Boring machines
- Industrial controllers
- Computer application technology
- Magnetohydrodynamic power
- CNC system
- Surge protection circuits
- Digital precision reference circuits
