UCC3919DG4 Overview
In the 16-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tube-shaped package holds it.The 16 terminations total to three.Device DUAL is located at the terminal position.The device consists of a total of 16 pins.The supply voltage 5V is necessary for high efficiency.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to 0°C~70°C.Apps for General Purpose are available on the device.A feature of UVLO describes it.Using a 3V~8VV power source should be able to power the device.The UCC3919 family includes it.During operation, 16 pins are used.Hot-swappable device has Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault programmable features.Presently, there is a sufficient supply of 1mA.As you can see, it is positioned in the direction of Surface Mount.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 3V so that the device can function normally.Vsup is set to 8V, the maximum supply voltage.Part 5V is associated with power supplies.In the case of a 14V output voltage, high efficiency can be achieved.
UCC3919DG4 Features
The terminal position of 16
Features of UVLO
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault
Output voltage of 14V
UCC3919DG4 Applications
There are a lot of Texas Instruments
UCC3919DG4 hot swap controllers applications.
- Safe board insertion and extraction
- Industrial computers and servers
- Redundant-array-of-independent-disk (RAID) storage
- Other forms of communications infrastructure
- Board or blade insertion into live backplanes
- Backplane
- Loads
- Distributed power systems
- Redundant negative voltage supplies
- Central office switching systems
