UCC3884N Overview
With its 16-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tube solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 8.3V~15V and has a 8.3V~15V supply voltage. Worked in a 0°C~70°C TA dc switcher before. The Through Hole allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 11V is input. Searching "UCC3884" will return other relevant dc to dc converter ics. 16 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 500mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 81 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controllers work at 750kHz Hz. At 440kHz, this controller performs best.
UCC3884N Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 81 %
Frequency: 750kHz
Switching Frequency: 440kHz
UCC3884N Applications
There are a lot of Texas Instruments
UCC3884N DC to DC converter applications.
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
