UCC3807N-3 Overview
With its 8-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4.1V~13.5V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a 0°C~70°C TA rating. Using this switching controller, it is possible to switch at 202kHz. As it has a Through Hole value, it can be used for general dc dc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . Various 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 10V is input. UCC3807 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. There is a particular type of Switching Regulator or Controllers in switching converter. The minimum input voltage of the dc dc voltage regulator should be 4.3V. Test statistics indicate DC regulator outputs 400mV voltage. normally, the dc dc regulator's output current is 100mA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 78 %. Having a Through Hole makes DC switcher ideal for most prototype and application designs. Switching controllers work at 1MHz Hz. The supply voltage must be 10V.
UCC3807N-3 Features
Transistor Driver Outputs
Switching Frequency: 202kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 78 %
Frequency: 1MHz
UCC3807N-3 Applications
There are a lot of Texas Instruments UCC3807N-3 DC to DC converter applications.
- Digital video recorders
- Machining centers
- Serial communication converter
- Printing equipment
- Driver circuits
- Adjustable voltage or current linear circuits
- Computed tomography (CT)
- Cutting machine tools
- Motor controller circuits
- Automatic testing equipment
