UCC3806DWTR Overview
It comes in a 16-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tape & Reel (TR) enclosure. The program can handle Transistor Driver dc switching's outputs (s). 8V~14.5V is the supply voltage and the operating voltage of the dc control. Suitable for work in a 0°C~70°C TA dc switcher. Switching can be done at 47kHz with this switching controller. dc dc regulator is made easier with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. An array of 16 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. UCC3806 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 11.9V. You should note down the dc dc regulator's usual output current of 100mA when you start a project. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. The Surface Mount makes DC switcher suitable for most applications and prototypes. Switching controller operates at 1MHz Hz. For nominal working status, the input voltage can be set as 14.5V.
UCC3806DWTR Features
Transistor Driver Outputs
Switching Frequency: 47kHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC3806DWTR Applications
There are a lot of Texas Instruments UCC3806DWTR DC to DC converter applications.
- Sensitive electronic devices
- Die casting equipment
- Access control systems
- Mobile phones
- Lathes
- Plate bending machines
- Large fire protection systems
- Hydro power
- Planers
- ATMs
