UCC3580DTR-3 Overview
With a 16-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). Voltages 8.5V~16V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a 0°C~70°C TA. This switching controller can switch at 400kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Enable, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. UCC3580 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. The type is a particular Switching Regulator or Controllers of switching converter. Based on the test statistics, DC regulator outputs voltage 400mV. A starting point for a project is to note down the dc dc regulator's usual output current, which is 100mA. A duty cycle set at 69 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controller operates at 1MHz Hz. There is a requirement for a 12V supply voltage. It is important that the controller is supplied with 3.5mA more than 3.5mA volts of current.
UCC3580DTR-3 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC3580DTR-3 Applications
There are a lot of Texas Instruments UCC3580DTR-3 DC to DC converter applications.
- Handheld GPS
- Various precision measuring instruments
- Medical equipment
- Large fire protection systems
- Flaw detection equipment
- Magnetohydrodynamic power
- Nuclear power plants
- Emergency lighting monitoring equipment
- Special machining machine tools
- Experimental setup
