UCC35702DTR Overview
Capsuled in the 14-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's8.8V~15V is the supply voltage and the operating voltage of the dc control. Worked in a 0°C~70°C TA dc switcher before. The switching controller can be switched at 100kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control, Sequencing, Soft Start which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. The 14 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 11V. Other relevant dc to dc converter ics will be returned if you search "UCC35702". Total pins of switching converter are 14. Switching converter is a special type of Switching Regulator or Controllers. It is recommended to use 9.6V as the minimum input voltage of dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 400mV. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. A frequency of 700kHz is used by the switching controller.
UCC35702DTR Features
Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz
UCC35702DTR Applications
There are a lot of Texas Instruments UCC35702DTR DC to DC converter applications.
- Refrigerators of central air conditioners
- Lathes
- Remotely powered electric motors
- Correction machines
- Product testing
- Sensitive electronic devices
- Experimental setup
- Alternators
- Magnetohydrodynamic power
- Emergency lighting monitoring equipment
