UCC28C43DGKR Overview
It comes in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 7.6V~18V. Qualified to work in an dc switcher with -40°C~105°C TJ. The switching controller can be switched at Up to 1MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. UCC28C43 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 8 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Statistically, the DC regulator outputs 18V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 1MHz is used by the switching controller. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement. 18V is the nominal working voltage. There is a nominal current supply of 2.3mA for this the controllers dc.
UCC28C43DGKR Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE
UCC28C43DGKR Applications
There are a lot of Texas Instruments UCC28C43DGKR DC to DC converter applications.
- Special machining machine tools
- Flaw detection equipment
- Imported equipment
- Arc suppression circuits
- Series voltage regulation circuits
- Computed tomography (CT)
- Constant current circuits
- Television equipment
- Electrical power transmission
- Serial communication converter
