UCC28910D Overview
In the 8-SOIC (0.154, 3.90mm Width), 7 Leads package, the ac to dc converter is embedded.In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~125°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING CONTROLLER .There is 420Hz~115kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 6.5V~30V (Vcc/Vdd).There have been 7 terminations of this program.There are 7 pins on the ac/dc converter.The ac dc converters is suitable for mounting by Surface Mount .The UCC28910 family can be used to search for similar acdc converters.Running 1 outputs is available.AC to DC converter is set to 1.26A for the output current.Its output voltage amounts to 5.25V .You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.It is assumed that a coverter generates 12W as its output power.The AC to DC inverter can be used with an input voltage of less than 85V V.You should always set this AC to DC converter to 15V .An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
UCC28910D Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 420Hz~115kHz
With 7 pins
Output Current at 1.26A
UCC28910D Applications
There are a lot of Texas Instruments UCC28910D AC DC Converters applications.
- Appliance Power Supplies
- Switching AC-DC Adapter
- Humidifier
- Standby Power Supplies
- Battery chargers for smart phones
- SMPS house keeping power supplies
- Appliances
- Shaver Charger
- IoT Applications
- Cellular phone chargers
