UCC2806NG4 Overview
In the PDIP package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. It can switch at 52kHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Voltage regulator dc to dc is designed to operate at 50 % duty cycle during power-ups and power-downs to ensure reliability. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. A frequency of 1MHz is set for the switching controller. You should keep dc regulator at -40°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 1MHz. It is possible to set the input voltage as 14.5V for nominal working statuses. This is an ideal solution for switching controllers with 100mA inputs. During normaloperations, it outputs a value of 11.9V. Voltage rating is 14.5V.
UCC2806NG4 Features
Switching Frequency: 52kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
UCC2806NG4 Applications
There are a lot of Texas Instruments
UCC2806NG4 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
