UCC27201AQDDARQ1 Overview
A higher degree of flexibility is achieved by adopting its 8-PowerSOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Tape & Reel (TR).Configuration is based on 2 drivers.Surface Mount is mounted in the way.Using a 8V~17V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~140°C TJ.The input type is Non-Inverting.It's configured with 8 terminations.The base part number UCC27201 refers to a number of related parts.Mounting the device requires Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 12V.There is a maximum output current of 3A.On the board, there are 8 component pins.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 120V.Gate drivers of this type are included in the Automotive, AEC-Q100 series.If the supply current exceeds 5.5mA, the unit cannot operate.
UCC27201AQDDARQ1 Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Operating with the supply voltage of Automotive, AEC-Q100
UCC27201AQDDARQ1 Applications
There are a lot of Texas Instruments UCC27201AQDDARQ1 gate drivers applications.
- Industrial Modules
- Refrigerator
- 3-Phase Motor Inverter Driver
- PCMCIA applications
- Welding
- Power factor correction (PFC) circuits
- serial peripheral interface (SPI), I2C
- High-voltage isolated DC-DC converters
- DC-DC Converters
- Active Clamp Flyback or Forward and Synchronous Rectifier
