UCC27200QDDARQ1 Overview
A higher level of flexibility is provided by its 8-PowerSOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the packaging method.Ideally, it should be mounted in the direction of Surface Mount.When the supply voltage is 8V~17V it is able to demonstrate its superiority.Gate type N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~140°C TJ.Non-Inverting is used as the input type.Mosfet driver is based on 8 terminations.There are various parts that can be found under its base part number UCC27200.Mosfet driver is mounted using Surface Mount.In the device, there are 8 pins.In order to operate, a voltage of 12V has to be applied.In the maximum case, the output current can be 3A volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.A board with 8 component pins is available.A boot strap voltage of 120V is the maximum possible high-side voltage.Based on its basis, it integrates 2 outputs.3A is the maximum output current supported by the device.Its maximum power dissipation of 2.7W shows its power loss capacity without overheating.As a precaution, make sure the supply current is kept at 4mA.The operating supply voltage should be set at 12V.Gate drivers in this series are included in the Automotive, AEC-Q100 series.By using the frequency 1GHz, we can increase efficiency.
UCC27200QDDARQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W
Operating with the supply voltage of Automotive, AEC-Q100
UCC27200QDDARQ1 Applications
There are a lot of Texas Instruments UCC27200QDDARQ1 gate drivers applications.
- Multicolor LED/laser displays
- High-speed communications
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- Topologies
- Motor Drives
- Solar inverters
- Smart Phones
- High power buffers
- DC/DC converters
- Industrial Modules
