UCC2581DG4 Overview
With a SOIC package, the switching controller is suitable for a wide range of applications. For 1 outputs, the dc motor controller is appropriate. Switching can be done at 21kHz with this switching controller. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. An array of 14 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 10V. There are a total of 14 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 7.4V. It is set to 87 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. A frequency of 100kHz is used by the switching controller. Ideally, dc regulator should be kept at a temperature of -40°C or higher. The temperature should not exceed 85°C degrees Celsius. In total, the switch converters have 1 function (s). We are designing chips that have 14 pins. There is a maximum frequency of 100kHz that the controller can switch at. Switching controllers with 100mA inputs are ideal for it. As a result of normalworking processes, a voltage of 600mV is output. In terms of maximum supply voltage, switching voltage regulators is rated 15V.
UCC2581DG4 Features
Switching Frequency: 21kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 87 %
Frequency: 100kHz
UCC2581DG4 Applications
There are a lot of Texas Instruments
UCC2581DG4 DC to DC converter applications.
- Servo drive system
- Digital display device
- Linear guide
- Ball screw pair
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
