UC5603NG4 Overview
Termination with a 9 device, which matches the transmission line's characteristic impedance, is considered a 9 termination. Because of its low package cost, the 16-DIP (0.300, 7.62mm) is widely used in the electronic industry. Tube's packaging is made of the same materials. Through Hole is used for mounting it on a PCB. A maximum operating temperature of 0°C~70°C should not be exceeded. The material is SCSI-qualified for standard applications. In order to maintain normal operation, there is a 3.8V~5.25V Supply Voltage provided. You can find related parts by using Base Part Number UC5603. There are a number of 16 pins included for specific applications. In terms of 9 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. On it there is a Through Hole-mount. Communication devices such as computers use 16 pins, which are pronged contacts. Power Supplies are needed to operate 5V Power Supplies. Here is the resistance of this electrical device: 110Ohm (Ω). As the device is able to operate on 220mA supply voltages, it can be used in a wide range of applications. To fully perform its functions, 5.25V needs supply current.
UC5603NG4 Features
9 terminations
Tube package
UC5603 family
16 pin count
9 signal lines
16 pins
5V power supplies
UC5603NG4 Applications
There are a lot of Texas Instruments
UC5603NG4 Signal Terminators applications.
- Programmable logic controller
- Remote input module
- Data Networking
- PCI Cards
- Telecommunication Equipment
- Data Routers
- Data Switches
- Programmable logic controller and remote input modules
- High speed protected termination for digital input with serialized SPI output
- IEC61131-2 type 1, 2 and 3
