UC3909N Overview
It comes in the package of a Tube. For convenience, it is included in the 20-DIP (0.300, 7.62mm) package.Through Hole is the mounting type of the device.The temperature should be set to 0°C~70°C TA to ensure reliable performance.An analog IC of BATTERY CHARGE CONTROLLER is used in this device.To charge the device, Constant - Programmable current is required.Based on the base part number UC3909, its related parts can be identified.It has 20 terminations.The device has a total of 20 pins.In order to operate it, it has 20 pins.Batteries with 15V should be able to power it.The device can withstand a supply voltage of 40V.It is possible to achieve high efficiency by using an output voltage of 5.25V.A 100mA output current is used for operation.Devices in this category are classified as Power Management Circuits.This device can work at as low a voltage as possible, such as 7.5V.It is set to 19mA for Vsup (maximum supply voltage).15V is the power supply setting for the part.The device has an input voltage of 15V.242kHz is the switching frequency of the part.A maximum input voltage of 40V volts can be applied to it.This operation requires a voltage of 6.2V as the maximum output supply voltage.During operation, the maximum output current is reduced to 100mA.
UC3909N Features
Power Management Circuits subcategory
Switching frequency of 242kHz
20-DIP (0.300, 7.62mm) package
UC3909N Applications
There are a lot of Texas Instruments
UC3909N Battery Chargers ICs applications.
- Opportunity charge
- Fast charge
- Fleet management
- Shop charger
- Golf carts
- Forklift
- Pallet jacks
- Personnel carriers
- Maintenance shops
- Rental fleets
