UC3823ADWG4 Overview
In the SOIC package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. It can switch at 1MHz. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. There are 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. The dc to dc regulator can only accept 20V input voltage. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 1MHz is set for the switching controller. Hence, CAN ALSO BE CONFIGURED IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. You should keep dc regulator at 0°C degrees or higher. There should be 70°C temperature above 70°C degrees Celsius when dc regulator runs. 1 functions (s) are included in the switch converters. Designing voltage regulators switchings with 16 pins. Switching can take place at a maximum frequency of 1.1MHz. This is an ideal solution for switching controllers with 200mA inputs. During normaloperations, it outputs a value of 2V. Voltage rating is 22V.
UC3823ADWG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC3823ADWG4 Applications
There are a lot of Texas Instruments
UC3823ADWG4 DC to DC converter applications.
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
