UC3708N Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.A packaging method of Tube is used.In the direction of Through Hole, gate drivers is mounted.In the absence of a 5V~35V supply voltage, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.In this device, temperatures must not exceed 0°C~70°C TA.The input type for this program is Non-Inverting.Its configuration starts with 8 terminations.There are various parts that can be found under its base part number UC3708.The device is mounted with Through Hole.The pins are configured with 8 when designing the chip.In addition, it is specifically designed to operate with a supply voltage of 20V.BUFFER OR INVERTER BASED MOSFET DRIVER is employed as its interface IC.The maximum output current can amount to 3A.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The number of component pins is 8.Based on its basis, it integrates 2 outputs.An output current of 3A is supported.Mosfet gate drivers is recommended to keep the supply current at 26mA to ensure greater stabilMosfet gate driversy.With its 10/35V power supply, it provides power for diverse applications.Its input is characterized by STANDARD.
UC3708N Features
Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
UC3708N Applications
There are a lot of Texas Instruments UC3708N gate drivers applications.
- AC-DC Inverters
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Topologies
- High-speed communications
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Head-up and Head mounted displays
- High power buffers
- Commercial air-conditioning (CAC)
- Solar power supplies
- Telecom switch mode power supplies
