UC2825DW Overview
It comes in a 16-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) are supported. dc controls with 8.4V~30V voltage are supplied and operated. Suitable for work in a -40°C~85°C TA dc switcher. In this switching controller, the switch can be set to 340kHz~460kHz. Surface Mount makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. You can find other relevant dc to dc converter ics by searching "UC2825". Pins number 16 of switching converter in total. There is a particular type of Switching Regulator or Controllers in switching converter. It is recommended that the input voltage of the dc dc voltage regulator be 8.8V. A 13V voltage of DC regulator was detected in the test statistics. It should be fully noted that the dc to dc regulator only accepts 30V input voltage at most. If you are starting a new project, you should note the dc dc regulator's typical output current is 1.5A. The duty cycle of the voltage regulator dc to dc can be set to 80 % on power-up or power-down to ensure reliability. A frequency of 1MHz is used by the switching controller. This value is CAN ALSO BE CONFIGURED IN CURRENT MODE so that DC to DC voltage regulator better serves the purpose. This voltage controller requires a supply voltage of 15V. It is important that the controller is supplied with 33mA more than 33mA volts of current.
UC2825DW Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2825DW Applications
There are a lot of Texas Instruments UC2825DW DC to DC converter applications.
- Packaging
- Planers
- Magnetohydrodynamic power
- Radio equipment
- Correction machines
- Scientific testing
- Window air conditioners
- Computer application technology
- Geothermal power
- Cutting machine tools
