Name: UC2823QG3
Brand: Texas Instruments
SKU: UC2823QG3
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-25°C~85°C TA
Packaging	Tube
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Additional Feature	CAN ALSO BE CONFIGURED IN CURRENT MODE
Subcategory	Switching Regulator or Controllers
Technology	BIPOLAR
Terminal Position	QUAD
Terminal Form	J BEND
Frequency	1MHz
Base Part Number	UC2823
Function	Step-Up, Step-Down, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	13V
Output Type	Transistor Driver
Input Voltage-Nom	15V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	1mA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	8.4V~30V
Control Features	Current Limit, Enable, Frequency Control, Ramp, Soft Start
Topology	Buck, Boost, Flyback, Forward Converter
Control Mode	VOLTAGE-MODE
Frequency - Switching	340kHz~460kHz
Input Voltage (Max)	30V
Control Technique	PULSE WIDTH MODULATION
Rise Time	30ns
Synchronous Rectifier	No
Fall Time (Typ)	30 ns
Switcher Configuration	SINGLE
Max Duty Cycle	80 %
Height Seated (Max)	4.57mm
Length	8.965mm
Width	8.965mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UC2823QG3 Product Details

UC2823QG3 Overview

It comes in a 20-LCC (J-Lead) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 8.4V~30V voltage are supplied and operated. A -25°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 340kHz~460kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . A variety of 20 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. UC2823 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 20 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13V. The dc to dc regulator is limited to 30V input voltage. You should note down the dc dc regulator's usual output current of 200mA when you start a project. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at a frequency of 1MHz. As a result, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE so that the need can be met more directly. It runs on a 1mA supply current.

UC2823QG3 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE