UC2823DW Overview
With its 16-SOIC (0.295, 7.50mm Width) package, the switching controller fits the needs of most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 8.4V~30V volts and has 8.4V~30V supply voltage. Suitable for work in a -25°C~85°C TA dc switcher. It can switch at 340kHz~460kHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, Frequency Control, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 16 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In addition to "UC2823", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 16 pins. There is a particular type of Switching Regulator or Controllers in switching converter. The test statistics indicate that DC regulator outputs a voltage of 13V. The dc to dc regulator is limited to 30V input voltage. The dc dc regulator's usual output current is 200mA, which should be noted down when you start a project. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. There is 1MHz frequency setting on the switching controller. For better satisfaction, the value of DC to DC voltage regulator is CAN ALSO BE CONFIGURED IN CURRENT MODE. The supply voltage should be 15V. Current supplied to the controller should not exceed 33mA.
UC2823DW Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC2823DW Applications
There are a lot of Texas Instruments UC2823DW DC to DC converter applications.
- Large fire protection systems
- Electric heating, lighting
- Access control systems
- PSRR circuits
- Hydro power
- Sensitive electronic devices
- Computer-related products
- Lathes
- Constant current circuits
- Pipe bending machines
