UC28023NG4 Overview
Capsuled in the 16-DIP (0.300, 7.62mm) package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 9V~30V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with -40°C~105°C TA. The switching controller is capable of switching at the 340kHz~460kHz position. A generalization of dc dc regulator can be made using Through Hole. To provide efficient switching control, Current Limit, Enable, Frequency Control, Ramp, Soft Start is included in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminals (s) are designed at DUAL. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 15V volts. You can find other relevant dc to dc converter ics by searching "UC28023". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13V. You should note down the dc dc regulator's usual output current of 200mA when you start a project. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. 1MHz is the frequency of the switching controller. DC to DC voltage regulator has the value of CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE to better satisfy the requirement. For nominal working status, the input voltage can be set as 30V.
UC28023NG4 Features
Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN PEAK CURRENT OR AVERAGE CURRENT MODE
UC28023NG4 Applications
There are a lot of Texas Instruments UC28023NG4 DC to DC converter applications.
- Computer monitoring equipment of building
- Laboratories
- Series voltage regulation circuits
- Injection molding machinery
- Domestic water pumps
- Post equipment
- USB circuits
- Large fire protection systems
- Window air conditioners
- Scientific testing
