UC2572DTRG4 Overview
With a SOIC package, the switching controller is suitable for a wide range of applications. Tape & Reel (TR) solid enclosure protects the pmic. This switching controller can switch at 100kHz. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 8 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. There are 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Voltage regulator dc to dc is designed to operate at 92 % duty cycle during power-ups and power-downs to ensure reliability. Users should apply 30V to operate the voltage regulator dc to dc safely and reliably. Keep dc regulator at a temperature of -40°C or above. DC regulator should run at a temperature of 85°C more than 85°C degrees Celsius. As a whole, there are 1 function(s) in the switch converters. In a dormant state, the dc switching uses 9mA. There is a design for voltage regulators switching with 8 pins. A maximum frequency of 300kHz can be set by the controller. The dc switcher's maximum input voltage is 35V; users must limit it accordingly. With 500mA input, it is ideal for switching controllers. This algorithm outputs a value of -70V in normaloperation. 4.2V is the required supply voltage. DC switcher will not be able to provide an output current above 500mA volts. Its datasheet indicates the switching converter can output a maximum of -1V volts. -70V voltage output is lower than -70V. This controller switches with 1 phases.
UC2572DTRG4 Features
Switching Frequency: 100kHz
PULSE WIDTH MODULATION
Max Duty Cycle: 92 %
UC2572DTRG4 Applications
There are a lot of Texas Instruments UC2572DTRG4 DC to DC converter applications.
- Digital video recorders
- Automatic plug-in machines
- Medical monitoring systems
- Gear/thread machining machines
- Computer monitoring equipment of building
- Special machining machine tools
- Die casting equipment
- Emergency lighting monitoring equipment
- Geothermal power
- PSRR circuits
