UC2526AN Overview
With its 18-DIP (0.300, 7.62mm) package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. PMIC packaging is solid with a Tube enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 7V~35V are the dc control's supply voltage and operating voltage, respectively. Worked in a -25°C~85°C TA dc switcher before. There is a switch at 1Hz~600kHz that can be used with this controller. It is suitable for general dc dc regulator when it is set to Through Hole. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Reset, Soft Start. The switch converters are connected to a SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . The 18 terminations can be used for a wide range of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In addition to "UC2526", there are other relevant dc to dc converter ics you can find. In total, switching converter has 18 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 13V. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. Switching controller operates at 450kHz Hz. The value of DC to DC voltage regulator is set at LG-MAX in order to fulfill the requirements more effectively. DC switching uses 14mA when it is dormant. It is possible to set the input voltage to 35V for nominal working status.
UC2526AN Features
Transistor Driver Outputs
Switching Frequency: 1Hz~600kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 450kHz
LG-MAX
UC2526AN Applications
There are a lot of Texas Instruments UC2526AN DC to DC converter applications.
- Industrial controllers
- Sink circuits
- Grinders
- Domestic water pumps
- Lathes
- Overvoltage protection circuits in TV sets
- Surge protection circuits
- Smart grid
- Precision electronic equipment
- Alternators
