UAF42AU Overview
Packaged in a 16-SOIC (0.295, 7.50mm Width) package, it is easy to install.Packaged in a Tube format, it is a very good product.In the case of this gadget, the mounting type is Surface Mount.The filter type for this part is Universal, Continuous-Time.With a power source of ±6V~18V, it should work.16-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the UAF42.In terms of frequency, it is at a cutoff or center frequency of 100kHz.As the reflow temperature reaches 260, it reaches its peak.During all periods of operation, 15V is used as a source of power for the component.There are a number of filters, called 3, and each filter has a unique figure.As soon as you start the machine, it should be warmer than -25°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 16 is the pin number of the component.In 4 circuits, there are various types of circuits.Depending on the model, the maximum supply temperature can be raised to 7mA.This is one of a number of Surface Mount mount packages that are included with the package.The voltage that it needs in order to function correctly is 18V, so the voltage must be applied to it.To make this device work, a supply voltage of 6V must be applied.
UAF42AU Features
Supply voltage of 15V
Maximum operating temperature of 85°C
4 circuits
Mount of Surface Mount
UAF42AU Applications
There are a lot of Texas Instruments
UAF42AU active filters applications.
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
- Zoom Spectral Analysis
