TSM104WIDRE4 Overview
There is a D case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Tape & Reel case. We are approaching the 16h termination of the year. In total, there are 16 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. There are two types of Operational Amplifier op amps in this case, and this device falls into one of them. 16 pins are located on the operational amplifiers. The input offset voltage is 1mV. The buffer amplifier is capable of operating from a supply current of 1.4mA . It is recommended to keep the voltage gain at 100dB at all times. On the buffer amps, there are 4 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 105°C. Under 30V is the minimum supply voltage for this electric component. Over 3V is a recommended supply voltage for buffer amps
TSM104WIDRE4 Features
16 Pins
supply voltage of 5V
100dB voltage gain
TSM104WIDRE4 Applications
There are a lot of Texas Instruments
TSM104WIDRE4 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
