Name: TS5A3357DCUTE4
Brand: Texas Instruments
SKU: TS5A3357DCUTE4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	15Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3357
Pin Count	8
Number of Outputs	3
Number of Channels	3
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Turn On Delay Time	6.5 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	334MHz
Turn-Off Delay Time	3.7 ns
On-State Resistance (Max)	15Ohm
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 10.5pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	6.5ns, 3.7ns
Charge Injection	3.4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-62dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Height Seated (Max)	0.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TS5A3357DCUTE4 Product Details

TS5A3357DCUTE4 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have a ratio of 3:1. Extended operating temperature around -40°C~85°C TA. Totally, there are 8 terminations. As a result of its 3 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 1.8V voltage supply. An injection of 8 pins is performed into the body of the electrical component. Multiplexers built on a SP3T switching circuit are built. TS5A3357 can be used to search for analog multiplexer variants. There is 15Ohm internal resistance in this digital multiplexer. For functions related to 8 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 1μA. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. The 1 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 334MHz bandwidths. A analog switch ics with 3 outputs is included.