TS5A3159ADBVTG4 Overview
As the electronic part is packed in SOT-23, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape and Reel. Total terminations are 6. The electronic part provides high-quality output because it has 1 channels. Powered by a 1.8V voltage supply, the electrical part should be switched on and run. The electrical component body receives 6 pins. An switch multiplexer with 1.1Ohm internal resistance has a value of 1.1Ohm. Datasheets for 6 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 100nA would be sufficient for this switch device. When the digital multiplexer is charged above 50nA, damage can occur. There are 100MHz bandwidths for data transfer. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. A analog switch ics with 2 outputs is included.
TS5A3159ADBVTG4 Features
1 Channels
100nA Supply Current
Bandwidth: 100MHz
TS5A3159ADBVTG4 Applications
There are a lot of Texas Instruments
TS5A3159ADBVTG4 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
