TS5A21366DCURG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 8-VFSOP (0.091, 2.30mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. Multiplexers built on a SPST - NO switching circuit are built. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with TS5A21366. Analog switches have 1Ohm internal resistance. The functions of 8 pins can be found in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. It would be sufficient to run this analogue multiplexer with 7.6μA current. Using a single voltage supply, this switch device consumes 1.65V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 9μA. 260MHz bandwidths enable data to be transferred.
TS5A21366DCURG4 Features
Switch Circuit: SPST - NO
7.6μA Supply Current
Bandwidth: 260MHz
TS5A21366DCURG4 Applications
There are a lot of Texas Instruments TS5A21366DCURG4 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Central office
- Video signal routing
- High-Voltage
- Ultrasound
- Modems
- PBX interfaces
- Avionics and Military Systems
- Low-Voltage
- Sample-and-hold systems
