Name: TS3A4751PWRG4
Brand: Texas Instruments
SKU: TS3A4751PWRG4
Availability: InStock

new-10%

TS3A4751PWRG4

Manufacturer part number:TS3A4751PWRG4

Manufacturer:Texas Instruments

Description:14ns, 9ns SPST - NO 900mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A4751 14 Pins 2nA 1.8V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:TS3A4751PWRG4 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	57.209338mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Resistance	900mOhm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	1.8V
Base Part Number	TS3A4751
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	3V
Number of Channels	4
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Nominal Supply Current	75nA
Max Supply Current	75nA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Number of Inputs	4
Supply Type	Single
Bandwidth	125MHz
Turn-Off Delay Time	10 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	61 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	23pF 20pF
On-state Resistance Match-Nom	0.09Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	14ns, 9ns
Charge Injection	3pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-95dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Switch-off Time-Max	12ns
Voltage - Supply, Single (V+)	1.6V~3.6V
Normal Position	NO
Height	1.2mm
Length	5mm
Width	4.4mm
Thickness	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A4751PWRG4 Product Details

TS3A4751PWRG4 Overview

Packed in 14-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Increasing operating temperature to around -40°C~85°C TA. In total, 14 terminations have occurred. Due to its 4 channels, the electrical component produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. It is part of the design of the 14 series that this electronic component is included. A SPST - NO switching circuit is used to build these analog multiplexers. Using the TS3A4751 search parameter, you can discover variants of the switch. As far as internal resistance is concerned, it has 900mOhm. Please refer to the datasheets for 14 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. An effective Single supply digital multiplexer. A low voltage of 1.6V should be applied to the electronic component. Analogue multiplexers require a 1.6V~3.6V voltage to drain from a single voltage supply. A voltage higher than 75nA may cause damage to the switch multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. This electrical part is compatible with 3V operating voltages. There are 4 inputs to be operated. There are 125MHz bandwidths for data transfer.