Name: TS3A44159RSVR
Brand: Texas Instruments
SKU: TS3A44159RSVR
Price: 0.92000 USD
Availability: InStock

new-10%

TS3A44159RSVR

Manufacturer part number:TS3A44159RSVR

Manufacturer:Texas Instruments

Description:23ns, 32ns SPDT 450mOhm QUAD Analog Switches BREAK-BEFORE-MAKE TS3A44159 16 Pins 20nA 1.8V 16-UFQFN

Case Package:SOT-23

Datasheet:TS3A44159RSVR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-UFQFN
Number of Pins	16
Weight	40.908362mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	450mOhm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	1.8V
Base Part Number	TS3A44159
Pin Count	16
Number of Outputs	8
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	15nA
Nominal Supply Current	150nA
Max Supply Current	400nA
Turn On Delay Time	25 ns
Number of Inputs	4
Supply Type	Single
Bandwidth	35MHz
Turn-Off Delay Time	35 ns
On-State Resistance (Max)	450mOhm
High Level Output Current	200mA
Low Level Output Current	200mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	71 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	50pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	23ns, 32ns
Charge Injection	139pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-73dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	75ns
Switch-off Time-Max	50ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Height	550μm
Length	2.6mm
Width	1.8mm
Thickness	500μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS3A44159RSVR Product Details

TS3A44159RSVR Overview

Shipping overseas is convenient with the electronic component packed in 16-UFQFN. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. Try searching with TS3A44159 if you're looking for variants. There is 450mOhm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 4.3V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 15nA current would be sufficient. This analog switch requires a voltage of 1.65V~4.3V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 400nA. 3V operating voltages are supported by the electronic component. It is possible to operate 4 inputs. A 35MHz-bandwidth can be used for data transfer. The analogue multiplexer has 8 outputs.