TS3A24157RSER Overview
Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operating temperature extended to -40°C~85°C TA. Totally, there are 10 terminations. As a result of its 2 channels, this electronic component provides high-quality output. With a 1.8V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 10 pins. Circuits based on SPDT switching are used to construct these analog switch ics. Using the TS3A24157 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 650mOhm. To find out what the 10 pins do, please refer to the datasheets. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 3.6V. Digital switch that provides Single power at a cost-effective price. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 15nA current. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. Put voltage above 25nA on the multiplexer to cause damage. Operating voltages of 3V are compatible with the electrical part. Operating 2 inputs is required. In 50MHz-bandwidths, data can be transferred. Multiplexer ics with 4 outputs are available.
TS3A24157RSER Features
2 Channels
Switch Circuit: SPDT
15nA Supply Current
Bandwidth: 50MHz
TS3A24157RSER Applications
There are a lot of Texas Instruments TS3A24157RSER Analog Switches & Multiplexers ICs applications.
- Sample hold systems
- Digital cross connects (DSX-1)
- Voice over IP/DSL – Integrated Access Devices, Smart
- Audio signal routing
- Remote wireless modules
- Modems
- Industrial
- Medical systems
- CSU
- High reliability control systems
