TS12A4517DG4 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOIC. In order to provide high reliability, an advanced packaging method Rail/Tube is used. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. There are 8 pins injected into the electronic part body. It has an internal resistance of 20Ohm. The functions of 8 pins can be found in the datasheets. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual supply type digital switch with a low cost. 1V is the lowest voltage that should be fed to the electronic electronic part. In order to operate this switch device, it would need a current of 70μA. A digital multiplexer may suffer damage if voltage is applied above 70μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. In the case of dual power supplies, you should connect at least 1V. The transfer of data can be performed over 464MHz bandwidths. There is also SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V to look out for in this electronic part. During operation, the multiplexer should not be exposed to a temperature above 85°C. The analog switch ics has 1 outputs.
TS12A4517DG4 Features
1 Channels
70μA Supply Current
Bandwidth: 464MHz
Additional Features: SUPPLY VOLTAGE CAN ALSO OPERATE WITH 3V TO 3.6V
TS12A4517DG4 Applications
There are a lot of Texas Instruments
TS12A4517DG4 Analog Switches & Multiplexers ICs applications.
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
