Name: TS12A4514D
Brand: Texas Instruments
SKU: TS12A4514D
Price: 1.39000 USD
Availability: InStock

new-10%

TS12A4514D

Manufacturer part number:TS12A4514D

Manufacturer:Texas Instruments

Description:75ns, 45ns SPST - NO 10Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS12A4514 8 Pins 1nA 3.3V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:TS12A4514D Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	75.891673mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	15Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Max Power Dissipation	471mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Base Part Number	TS12A4514
Output	SEPARATE OUTPUT
Pin Count	8
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	50nA
Max Supply Current	50nA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Supply Type	Single
Bandwidth	475MHz
Turn-Off Delay Time	80 ns
-3db Bandwidth	520MHz
On-State Resistance (Max)	10Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	94 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	7.5pF 7.5pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	75ns, 45ns
Charge Injection	-11.5pC
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	2.7V~12V
Normal Position	NO
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS12A4514D Product Details

TS12A4514D Overview

This electronic part is conveniently packaged in 8-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tube. In Surface Mount, you'll find this switch device. 1:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. 8 terminations have been made so far. The electronic part provides high-quality output because it has 1 channels. A 3.3V voltage supply should turn on and run the electronic component. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPST - NO switching circuits. There are 1 circuits in this multiplexer. Try searching with TS12A4514 if you're looking for variants. The internal resistance of this digital multiplexer is 15Ohm. For details about the functions of 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 12V. The analog switch ic is of the Single supply type and is cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. For this digital switch to work, 50nA current would suffice. The voltage required by this switch device is 2.7V~12V, draining from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 50nA. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. There are various bandwidths available for data transfer.