Welcome to Hotenda.com Online Store!

logo
userjoin
Home

TRS3232ECDBG4

TRS3232ECDBG4

TRS3232ECDBG4

Texas Instruments

16 Pin TRS3232 Receivers2/2 Drivers/ReceiversMin 3V VMax 5.5V V

SOT-23

TRS3232ECDBG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SSOP (0.209, 5.30mm Width)
Number of Pins 16
Supplier Device Package 16-SSOP
Weight 128.593437mg
Operating Temperature0°C~70°C
PackagingTube
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Type Transceiver
Max Operating Temperature85°C
Min Operating Temperature -40°C
Voltage - Supply 3V~5.5V
Base Part Number TRS3232
Max Supply Voltage5.5V
Min Supply Voltage3V
Nominal Supply Current1mA
Logic Function Receiver
Data Rate250kbps
Protocol RS232
Number of Drivers/Receivers 2/2
Duplex Full
Receiver Hysteresis300mV
Number of Drivers 2
Number of Transceivers 1
Number of Receivers 2
Number of Transmitters 2
Radiation HardeningNo
RoHS StatusROHS3 Compliant
Lead Free Contains Lead
In-Stock:4746 items

TRS3232ECDBG4 Product Details

TRS3232ECDBG4 Overview


Due to the enhanced 16-SSOP (0.209, 5.30mm Width) package, this driver IC is excellent for driving common LEDs.The package of this receiver is Tube.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.On any Surface Mount-type PCB or development board, you can install this wide receiver.A differential driver like this uses 3V~5.5V of power.During operation, this electronic part may have up to 2/2 eligible receivers/drivers.The operating temperature of this ic receiver is 0°C~70°C. It is primarily designed for applications with low temperatures.Since the part number TRS3232 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.An enhanced power dissipation control driver IC featuring 16 pins.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In total, there are 1 transceivers implemented by this module isolated transceiver.There are 2 receivers inside.On the part, 2 drivers are embedded in order to facilitate the operation of the device.A transceiver module's temperature of less than 85°C is required for operation.There must be at least -40°C minimum operating temperature for this optical transceiver.The transceiver's maximum supply voltage that can be applied to this IC is rated at 5.5V.An antenna transmits or sends data through 2 transmitters, which are can transceivers used to transmit radio waves to send data.In order to use this line driver ic, it is necessary to have a voltage supply of at least 3V.There is a 16-SSOP supplier package that is used for this wide receiver.

TRS3232ECDBG4 Features


Tube package
16 pins

TRS3232ECDBG4 Applications


There are a lot of Texas Instruments TRS3232ECDBG4 Drivers/Receivers/Transceivers applications.

  • Wireless 3D game
  • Wired telephone
  • transmission relay
  • Wireless transmission
  • Remote controls
  • AV receiver
  • Wireless interactive experience
  • Bridges
  • Precision geodetic measurement
  • Fiber distributed data interface (FDDI)

Get Subscriber

Enter Your Email Address, Get the Latest News