TPS92518HVQPWPRQ1 Overview
It saves board space with the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package. For the design of these LED drivers, 2 outputs are used.In order to mount the led light driver, Surface Mount is used.When it emerges as a DC DC Controller, it performs extremely well and is highly reliable.It is possible for the led light driver to operate at a temperature of -40°C~125°C TA.The benefits of Automotive, Lighting are considerable.Based on the frequency of 2MHz, it operates.In this case, the termination value is 24.The LED light driver has a base configuration of 24 pins.Failures may occur if the voltage supply is below 6.5V.A total of 2 segments are estimated.TPS92518 is the base part number for this LED driver.A 62V volt output voltage is provided by this device.Supply voltage can be set to a maximum value of 65V.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.
TPS92518HVQPWPRQ1 Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TA
Frequency of 2MHz
Supply voltage of 14V
TPS92518HVQPWPRQ1 Applications
There are a lot of Texas Instruments TPS92518HVQPWPRQ1 LED Driver ICs applications.
- Street lighting
- Architectural lighting
- Down lighting
- Stage Lighting and Signage
- Portable lighting
- LED Lightings for Inspection Devices
- White LED Backlight for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- High-end retail lighting
- A- lamps
