TPS71025PE4 Overview
Rail/Tube cases are used for delivery. In order to package the IC voltage regulator, a PDIP case is used. The PMIC chip has 8 terminations. In terms of output type, Fixed is what the Regulator IC produces. There is an output current of 500mA on this regulator. IC voltage regulator has a sum of 8 pins. It has 1 outputs to ensure that the performance of this regulator is prompt and sufficient. A dropout voltage of 10 volts is what makes it a dropout voltage. Depending on the chip, 8 pins may be available. The component shown here is a typical Other Regulators component. Taking into account the operation requirements, the maximum output current of the IC voltage regulator reaches 500mA. It operates in the 280μA Quiescent Current state. The temperature should be below 125°C when you use the IC voltage regulator. It is recommended that the chip be operated at a temperature no lower than 0°C operating temperature. Generally, this voltage regulator IC can output 2.5V volts on a system level.
TPS71025PE4 Features
330mV dropout voltage
Other Regulators subtageroy
The maximum operating temperature of 0°C
TPS71025PE4 Applications
There are a lot of Texas Instruments TPS71025PE4 Linear Voltage Regulators applications.
- Ultrasound
- TVS diodes
- High output current applications
- Telematics
- Hot swap controller
- UPS (Uninterruptible Power Supply )
- Aging system
- Car lighting
- Portable medical devices
- Gateway module
