TPS70251PWPG4 Overview
This Voltage Regulator IC comes inRail/Tube packaging. In order to package the IC voltage regulator, a HTSSOP EP case is used. On the regulater IC chip, there are a total of 20 terminations. In terms of output type, Fixed is what the Regulator IC produces. As far as its current output is concerned, it stands at 500mA. The sum of the pins in this unit is 20. Featuring 2 outputs in total, this voltage regulator IC enables prompt, sufficient performance regardless of the application. A dropout voltage of 10 volts is what makes it a dropout voltage. There are 20 pins on the chip. In this instance, we are dealing with a typical Other Regulators-shaped component. A maximum output current of 500mA is required to meet the operation requirements. It operates in the 190μA Quiescent Current state. Under 125°C degrees, you should use the regulator IC. There is no operating temperature below -40°C for the chip. Generally, this voltage regulator IC can output 1.8V volts on a system level.
TPS70251PWPG4 Features
170mV dropout voltage
Other Regulators subtageroy
The maximum operating temperature of -40°C
TPS70251PWPG4 Applications
There are a lot of Texas Instruments TPS70251PWPG4 Linear Voltage Regulators applications.
- PLL (Phase-Locked Loop)
- Camera
- Low-voltage microprocessor power supplies
- Car eCall
- Battery-powered device
- Body control modules
- SoC
- Pumps
- TVS diodes
- SMPS (Switching-Mode Power Supply)
