Name: TPS53632GRSMR
Brand: Texas Instruments
SKU: TPS53632GRSMR
Price: 4.89000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	32-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	32
Operating Temperature	-10°C~105°C
Packaging	Tape & Reel (TR)
Series	D-CAP+™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	32
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Terminal Form	NO LEAD
Supply Voltage	3.3V
Base Part Number	TPS53632
Function	Step-Down
Number of Outputs	2
Output Type	PWM Signal
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Voltage - Supply (Vcc/Vdd)	3.1V~5.5V
Quiescent Current	4mA
Control Features	Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	CURRENT-MODE
Frequency - Switching	1MHz
Input Voltage (Max)	5.5V
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	0.8mA
Output Voltage-Min	0.5V
Serial Interfaces	I2C
Clock Sync	Yes
Height	1mm
Length	4mm
Width	4mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS53632GRSMR Product Details

TPS53632GRSMR Overview

In the 32-VFQFN Exposed Pad package, the switching controller meets most application requirements. dc motor controller is suitable for 2 output generation. The pmic is packaged in Tape & Reel (TR) solid enclosure. PWM Signal dc switching's outputs (s) are supported. dc controls with 3.1V~5.5V voltage are supplied and operated. Suitable for work in a -10°C~105°C dc switcher. Switching can be done at 1MHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. Featured in the dcdc regulator is Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. There are a QUAD terminal on the switching converters. The 32 terminations can be used for a wide range of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 5V nominal DC switcher's voltage input. TPS53632 can be used to locate other relevant dc to dc converter ics. Total pins of switching converter are 32. 4.5V should be the minimum input voltage for the dc dc voltage regulator. The dc to dc regulator can only accept 5.5V input voltage. There are several dc to dc voltage regulator in the D-CAP+? series. The dc switching utilizes 4mA when it is in a dormant state. The supply voltage should be 3.3V. In order to ensure proper operation, the controller should not receive more current than 0.8mA.