TPS53127PW Overview
The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. 2 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~24V. A -40°C~85°C TA dc switcher is not a problem. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Soft Start. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "TPS53127". There are a total of 24 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. A 30V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 170mA, which should be noted down when you start a project. It is estimated that this dc regulatorhas a maximum frequency of 700kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that the need can be met more directly. To operate the voltage regulator dc to dc safely and reliably, users should apply 24V. The dc to dc voltage regulator belongs to the D-CAP2? series. In dormant mode, 450μA is used. In order to ensure the dc switcher's functionality, users must limit the voltage to 24V due to the dc switcher's maximum input voltage. The supply voltage must be 4.5V. Output current will not exceed 15A. You should not supply more current than 0.8mA to the controller. Datasheets state the switching converter can output up to 5.5V volts. 760mV voltage output is lower than 760mV.
TPS53127PW Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53127PW Applications
There are a lot of Texas Instruments TPS53127PW DC to DC converter applications.
- Cutting machine tools
- Domestic water pumps
- Textile machinery
- CMM
- Digital display device
- Laboratories
- Remotely powered electric motors
- Pipe bending machines
- Printing equipment
- Network technology
