TPS53126RGET Overview
It comes in a 24-VFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~24V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of 350kHz 700kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Enable, Frequency Control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . A variety of 24 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. TPS53126 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 24 pins. Switching converter is a special type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5.5V. You should note down the dc dc regulator's usual output current of 15A when you start a project. This dc regulatorhas a max frequency of 700kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that the need can be met more directly. D-CAP2™ is a series of dc to dc voltage regulator. DC switchings that are dormant use 450μA. The dc switcher's maximum input voltage is 24V; users must limit it accordingly. There must be a 4.5V supply voltage. DC switcher will not be able to provide an output current above 15A volts. There should be 0.8mA more than 0.8mA amps of current supplied to the controller. Its datasheet indicates the switching converter can output a maximum of 5.5V volts. voltage controllers with a minimum voltage output of 760mV cannot operate.
TPS53126RGET Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53126RGET Applications
There are a lot of Texas Instruments
TPS53126RGET DC to DC converter applications.
- Computer application technology
- Network technology
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
