TPS51100DGQR Overview
There are 1 outputs supported by the voltage regulator. The alternator regulator is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad container to facilitate transportation. The power regulator is currently available in Tape & Reel (TR) packages. In general, this voltage controller outputs a voltage of 1.2V~3.6V. Easy adaptability thanks to Surface Mount universal mount. The shunt regulator is intended for use in applications such as Converter, DDR and others. It is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions. This external regulator requires a voltage input of 4.75V~5.25V. The voltage regulator contains 10terminals. Alternator regulator pinouts begin with 10 pins. Check out search TPS51100 for more pin-to-pin solutions. 10pins are found on the power supply regulator. It is recommended that the electrical regulator outputs a value of 3A at the present time. The input voltage of this rectifier regulator must be higher than 4.7V. A power supply regulator supplied with 5V volts can accomplish many demanding tasks. A maximum current of 3Ais intended to be produced by the voltage regulator. This alternator regulator presents a quiescent current of 500μA. In this regulator, the supply voltage can be as low as 4.75V. Voltage regulators can supply voltages up to 5.25V. An interface IC BUS TERMINATOR SUPPORT CIRCUIT is used with this rectifier regulator.
TPS51100DGQR Features
Widely used in Converter, DDR applications
Adopts BUS TERMINATOR SUPPORT CIRCUIT interface IC
TPS51100DGQR Applications
There are a lot of Texas Instruments TPS51100DGQR Specialized Voltage Regulators applications.
- Digital-Still Cameras
- PDAs
- Mobile PC Regulator
- Cell Phones
- Passive-Matrix LCD Displays
- Telecom/Datacom
- DDR Memory Termination
- Communications Infrastructure
- LCD Monitors
- Set-Top Box
