TPS40304DRCT Overview
As a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 3V~20V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 600kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 10. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "TPS40304" will reveal other relevant dc to dc converter ics. 10 pins are present on switching converter. Statistically, the DC regulator outputs 6.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. DC regulators have a maximum frequency of 660kHz. As long as the dc switching is in a dormant state, it utilizes 2.5mA. It is possible to set the input voltage as 20V for nominal working statuses. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. Voltage 3V is necessary for the supply. Input current cannot exceed 25A with this dc switcher. At its maximum, the switching converter can output 18V volts. At its lowest voltage, the voltage controller does not produce less than 6.2V.
TPS40304DRCT Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40304DRCT Applications
There are a lot of Texas Instruments
TPS40304DRCT DC to DC converter applications.
- Automation technology
- CMM
- Various precision measuring instruments
- Various precision measuring detectors
- Flaw detection equipment
- Balance equipment
- Industrial robots
- Industrial controllers
- Die casting equipment
- Injection molding machinery
