Name: TPS40211DRCRG4
Brand: Texas Instruments
SKU: TPS40211DRCRG4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Surface Mount	YES
Number of Pins	10
Weight	26.109911mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS40211
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	250V
Output Type	Transistor Driver
Max Output Current	6A
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING REGULATOR
Output Configuration	Positive
Output Current	400mA
Voltage - Supply (Vcc/Vdd)	4.5V~52V
Quiescent Current	1.5mA
Control Features	Enable, Frequency Control, Soft Start
Topology	Boost, Flyback, SEPIC
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Frequency - Switching	35kHz~1MHz
Max Input Voltage	52V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Max Frequency	1MHz
Max Duty Cycle	95 %
Clock Sync	Yes
Duty Cycle	95 %
Height	1mm
Length	3mm
Width	3mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40211DRCRG4 Product Details

TPS40211DRCRG4 Overview

This switching controller fits most application requirements since it is packaged in a 10-VFDFN Exposed Pad package. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). Transistor Driver dc switching's outputs (s) are supported. 4.5V~52V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. There is a switch at 35kHz~1MHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING REGULATOR is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of terminations with 10 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "TPS40211". There are only 10 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. DC regulator outputs 250V voltage according to the test statistics. normally, the dc dc regulator's output current is 400mA, which you should keep in mind when starting a project. voltage regulator dc to dcs with a 95 % duty cycle are designed to be reliable when powered on and powered off. DC regulator's maximum frequency is 1MHz. When the dc switching is dormant, it uses 1.5mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 52V. The supply voltage must be 4.5V. Output current will not exceed 6A.