TPS40190DRCT Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 4.5V~15V volts and has 4.5V~15V supply voltage. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 300kHz. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at DUAL. Different dc switching's functions can be applied to 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. A search for "TPS40190" will reveal other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Based on the test statistics, DC regulator outputs voltage 12.75V. The dc dc regulator's usual output current is 20A, which should be noted down when you start a project. DC regulator's maximum frequency is 360kHz. When the dc switching is dormant, it uses 2.5mA. The dc switcher's maximum input voltage is 15V, so users must limit the voltage accordingly. The supply voltage must be 4.5V. Output current will not exceed 20A. Depending on the datasheet, the switching converter can output 12.75V volts at its peak. 600mV voltage output is lower than 600mV.
TPS40190DRCT Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
TPS40190DRCT Applications
There are a lot of Texas Instruments TPS40190DRCT DC to DC converter applications.
- Elevator lighting
- Linear guide
- Driver circuits
- Current source circuits
- Game consoles
- Flaw detection equipment
- Production lines
- Electrical power transmission
- Handheld GPS
- Digital precision reference circuits
