TPS40132RHBT Overview
It comes in the 32-VFQFN Exposed Pad package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). dc controls with 4.5V~28V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 100kHz~1.2MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Current Limit, Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a QUAD terminal on the switching converters. The 32 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5V. Search for "TPS40132" to find other relevant dc to dc converter ics. 32 pins are on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. A 5.8V voltage of DC regulator was detected in the test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 40A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 87.5 %. Switching controller operates at 350kHz Hz. DC to DC voltage regulator has a value of ALSO OPERATES AS LDO REGULATOR to better satisfy the need. In dormant mode, 1mA is used. The dc switcher's maximum input voltage is 40V; users must limit it accordingly. Voltage 1V must be supplied. There will be 40A output current greater than 40A from the dc switcher. At its maximum, the switching converter can output 5.8V volts. At least 600mV voltage is output by the voltage controller.
TPS40132RHBT Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1.2MHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 87.5 %
Frequency: 350kHz
ALSO OPERATES AS LDO REGULATOR
TPS40132RHBT Applications
There are a lot of Texas Instruments TPS40132RHBT DC to DC converter applications.
- Analog precision reference circuits
- Telecommunications equipment
- Injection molding machinery
- Current source circuits
- Energy management systems
- Serial communication converter
- Packaging
- Scientific testing
- Power supplies of electronic gadgets
- Mobile phones
