Name: TPS40074RHLR
Brand: Texas Instruments
SKU: TPS40074RHLR
Price: 4.22000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Lifecycle Status	NRND (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	20-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	20
Weight	47.287005mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Not For New Designs
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS40074
Function	Step-Down
Number of Outputs	1
Qualification Status	Not Qualified
Output Voltage	23V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	28V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Quiescent Current	1.5mA
Control Features	Current Limit, Enable, Frequency Control, Power Good, Soft Start
Max Output Voltage	23V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	Up to 1MHz
Max Input Voltage	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	700mV
Switcher Configuration	PUSH-PULL
Max Frequency	1MHz
Duty Cycle (Max)	95%
Height	1mm
Length	4.5mm
Width	3.5mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS40074RHLR Product Details

TPS40074RHLR Overview

It comes in a 20-VFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Cut Tape (CT) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~28V voltage are supplied and operated. A -40°C~85°C TA dc switcher is not a problem. A switching controller such as this can switch at a value of Up to 1MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at QUAD . A variety of 20 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. TPS40074 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 20 pins. As determined by the test statistics, the output voltage of DC regulator is 23V. You should note down the dc dc regulator's usual output current of 20A when you start a project. This dc regulatorhas a max frequency of 1MHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 28V. DC switchings that are dormant use 1.5mA. The dc switcher's maximum input voltage is 28V; users must limit it accordingly. There must be a 4.5V supply voltage. DC switcher will not be able to provide an output current above 20A volts. Its datasheet indicates the switching converter can output a maximum of 23V volts. voltage controllers with a minimum voltage output of 700mV cannot operate.