TPS40041DRBT Overview
Capsuled in the 8-VDFN Exposed Pad package, the switching controller can be used for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) can be handled by it. dc controls with 2.25V~5.5V voltage are supplied and operated. Work well in dc switchers with a -40°C~125°C TJ. Switching can be done at 600kHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. Enable is used for efficient switching control in the dcdc regulator. An analog IC SWITCHING CONTROLLER is connected to the switch converters. There are a DUAL terminal on the switching converters. A variety of terminations with 8 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. In addition to "TPS40041", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. Statistically, DC regulator outputs 4.95V volts. normally, the dc dc regulator's output current is 15A, which you should keep in mind when starting a project. It is set to 88 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. There is a maximum frequency of 700kHz for this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V is used to better suit the DC to DC voltage regulator's situation. It is suggested that users apply 5.5V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. DC switching uses 2mA when it is dormant. Since the dc switcher's maximum input voltage is 5.5V, the voltage must be regulated accordingly. A voltage of 2.25V is required for the supply. There will be 15A current output from the dc switcher above 15A. A datasheet states that the switching converter can output 4.84V volts at its maximum. Lowest voltage output of the voltage controller must be greater than 600mV.
TPS40041DRBT Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.95V
TPS40041DRBT Applications
There are a lot of Texas Instruments TPS40041DRBT DC to DC converter applications.
- Constant current circuits
- CMM
- Plate bending machines
- Smart grid
- Printing equipment
- Network technology
- Hydraulic presses
- Combined machine tools
- Computer monitoring equipment of building
- Arc suppression circuits
